-
Stainless Steel Pressure Regulator
-
Back Pressure Regulating Valve
-
Changeover Manifold
-
Brass Pressure Regulator
-
Stainless Steel Tube Fittings
-
Air Compressor Check Valve
-
Stainless Steel Ball Valve
-
Water Solenoid Valve
-
Stainless Steel Needle Valve
-
Gas Solenoid Valve
-
Stainless Steel Diaphragm Valve
-
Gas Flow Meter
-
Flexible Hose Tubing
-
Pneumatic Pressure Control Valve
-
Gas Pressure Test Gauge
-
Medical Oxygen Regulator
-
Dariof FassiniAll perfect. Quality is 4.5 on 5 but quality to price ratio is excellent.
-
Jasper MokkinkI have had an great experience ordering from Wolfy! The communication was always quick and clear. Adding parts to your order after you made your payment is also accepted by Wolfy. They are also willing to hold your order for a little bit if you need time to decide what additional parts you would like to add. I ordered compression fittings.
Stainless steel 316L Automatic change-over switching station for high flow rate and for the connection of 2 x 2 cylinder
Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xMax Inlet Pressure | 2200, 3000 Psig | Outlet Pressure Range | 0~25, 0~50, 0~100, 0~150 , 0~250psig |
---|---|---|---|
Working Temperature | -40° F ~+165° F(-40°C+74°C) | Cv | 0.14 |
Valve Seat | PU, PTFE ,FCTFE | Body Material | 316L |
Diaphragms | 316L | Pressure Gauge Size | 2" |
Port | SHENZHEN | ||
High Light | gas control panel,pressure control panel |
WL300 Series Semi-automatic Changeover Device
Product Specifications
1) Max. Inlet Pressure: 3000, 2200Psi
2) Max. Outlet Pressure: 25, 50, 100, 150, 0~250Psi
3)Working Temperature: -40℃~74℃(-40℉~165℉)
4) Leakage rate: 2 x 10-8 atm.cc/sec He
5)Cv: 0.08
Design Features
1) Pressure regulator for special gas
2) Equipped relief pressure valve
3)Pressure regulator and pipe through the pressure test and leakage test
4)2" stainless steel pressure gauge, reading clearly
5) The knob of diaphragm valves with on/off logo.
Material List
|
|||
Body material
|
Stainless steel 316L
|
||
Valve Seat
|
PU, PTFE, PCTFE
|
||
Diaphragm
|
Stainless steel 316L
|
||
Inlet connection
|
1/4" NPT (F)
|
||
Outlet connection
|
1/4" NPT (F)
|
High pressure outlet pressure flow curve
Low pressure outlet pressure flow curve
ORDERING INFORMATION | ||||||||
WL3 | 1 | 1 | 1 | S | H | 1 | 1 | -N2 |
Series | Function Options | Outlet Connection | Inlet Connection | Body Material |
Input Pressure |
Outlet Pressure |
Gauge | Gas Option |
WL300 Series Semi-automatic Changeover Device | 1.With emptying, purging distribution function | 1:1/4”NPT(F) | 1:1/4″Weldmg | S:stainless | H:3000psi | 1:25psi | 1:MPa | Blank: None |
2.Wrthout Emptying, purging distribution function | 2:1/4”Tube fitting | 2:1/4”NPT(M) | steel | M:2200psi | 2:50psi | 2:Bar/psi | N2:nitrogen | |
3.Emptying. purging distnbuUon+pressure sensor | 3:3/8”NPT(F) | 3:3/8”Melding | C:nickel plated | L:1000psi | 3:100psi | 3:psi/KPa | O2:oxygen | |
4.With pressure sensor | 4:3/8”Tube fitting | 4:3/8”NPT(M) | brass | O: Other | 4:150psi | 4:Other | H2:hydrogen | |
5:Other | 5:1/2”NPT(F) | 5:1/2”Melding | 5:250psi | C2H2:acetylene | ||||
6:1/2”Tube fitting | 6:1/2”NPT(M) | 6:Other | CH4:methane | |||||
7:Other | 7:1/4”Tube fitting | Ar:argon | ||||||
8:3/8″Tube fitting | He:helium | |||||||
9:1/2″Tube fitting | Air:air | |||||||
10:Other |
FAQ
Q1. What products can you provide?
Re: High pressure regulator, cylinder gas regulator, ball valve, needle valve, compression fittings(connections).
Q2. Can you make the products based on our requests, such as connection, thread, pressure and so on?
Re: Yes, We have experienced techincal team and can design and produce the products according to your requirements. Take a pressure regualtor for example, we can set the range of pressure gauge according actual working pressure, if the regulator is connected to a gas cylinder, we can add an adaptor such as CGA320 or CGA580 to connect the regulator with the cylinder valve.
Q3. What about the quality and price?
Re: Quality is very good. Price is not low but pretty reasonable at this quality level.
Q4. Can you provide samples to test? For free?
Re: Of course, you can take several to test firstly. Your side shall bear the cost due to its high value.
Q5. Can you operate OEM orders?
Re: Yes, OEM is supported though we also have our own brand named AFK.
Q6. What payment methods for chose?
Re: For small order, 100% Paypal, Western Union and T/T in advance. For bulk purchase, 30%T/T, Western Union, L/C as deposit, and 70% balance paid before shipment.
Q7. How about the lead time?
Re: Usually, delivery time is 5-7 working days for sample, 10-15 working days for mass production.
Q8. How will you ship the goods?
Re: For small amount, international express is used mostly such as DHL, FedEx, UPS, TNT. For large amount, by air or by sea. Besides, you also can have your own forwarder pick up the goods and arrange the shipment.