-
Stainless Steel Pressure Regulator
-
Back Pressure Regulating Valve
-
Changeover Manifold
-
Brass Pressure Regulator
-
Stainless Steel Tube Fittings
-
Air Compressor Check Valve
-
Stainless Steel Ball Valve
-
Water Solenoid Valve
-
Stainless Steel Needle Valve
-
Gas Solenoid Valve
-
Stainless Steel Diaphragm Valve
-
Gas Flow Meter
-
Flexible Hose Tubing
-
Pneumatic Pressure Control Valve
-
Gas Pressure Test Gauge
-
Medical Oxygen Regulator
-
Dariof FassiniAll perfect. Quality is 4.5 on 5 but quality to price ratio is excellent.
-
Jasper MokkinkI have had an great experience ordering from Wolfy! The communication was always quick and clear. Adding parts to your order after you made your payment is also accepted by Wolfy. They are also willing to hold your order for a little bit if you need time to decide what additional parts you would like to add. I ordered compression fittings.
R41 Stainless Steel Pressure Regulator High Pressure 25MPA For High Purity Gas
Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Name | Gas Pressure Regulator | Material | Stainless Steel |
---|---|---|---|
Application | Industrial | Color | Siliver |
Inlet And Outlet Connection | 1/4"NPT F | Inlet Pressure Range | 25MPA |
Outlet Pressure Range | 0.4MPA | Weight | 1.5kg |
Cv | 0.09 | MOQ | 1pcs |
High Light | 6000 PSI Stainless Steel Pressure Regulator,Stainless Steel Pressure Regulator 25MPA,FKM Stainless Steel Pressure Regulator |
Features
2. Larger outlet pressure adjustment range
3. It can be used for standard gas and non corrosive gas
4. Install a 20 micron filter element at the inlet
5. Oxygen environment application options can be provided |
|
Technical Data
2. Outlet pressure range: 0 ~ 1500,0 ~ 3000
3. Material of internal components: Valve seat: PCTFE Piston: 316L O-ring: FKM Filter element: 316L
4. Working temperature: - 26 ℃ ~ + 74 ℃ (- 15 ℉ ~ + 165 ℉)
5. Leakage rate (helium): Inside: no visible bubbles External: no visible bubbles
6. Flow coefficient (CV): 0.09
7. Parent port: Inlet: 1 / 4NPT Outlet: 1 / 4NPT Pressure gauge port: 1 / 4NPT |
|
Ordering Information
R41 | L | B | B | D | G | 00 | 00 | P |
Item | Body Materia | Body Hole | Inlet Pressure | Outlet Pressure | Pressure Gauge | Inlet Size | Outlet Size | Options |
R41 | L:316 | A | B:6000psig | D:0~3000psig | G:MPa gauge | 00:1/4″NPT(F) | 00:1/4″NPT(F) | P:Panel mounting |
B:Brass | B | D:3000psig | E:0~1500psig | P:Psig/bar gauge | 00:1/4″NPT(M) | 00:1/4″NPT(M) | ||
D | F:0~500psig | W:No gauge | 10:1/8″OD | 10:1/8″OD | ||||
G | G:0~250psig | 11:1/4″OD | 11:1/4″OD | |||||
J | 12:3/8″OD | 12:3/8″OD | ||||||
M | 15:6mm”OD | 15:6mm”OD | ||||||
16:8mm”OD | 16:8mm”OD |
Installation instructions and precautions of pressure reducing valve
1.The filter must be installed upstream of the pressure reducing valve, otherwise the system particles will damage the valve seat,resulting in internal leakage of the pressure regulator, downstream pressure rise, and easy damage to the outlet pressure gauge or other equipment. It is recommended to use a filter element with a precision of not less than 20 microns
2.It is not recommended to use thread sealant or liquid raw material tape for NPT thread installation. Improper operation will easily cause liquid to flow to the filter element in the valve and cause the filter element to be blocked. Finally, there is no pressure at the valve outlet or the flow is too low
3.Before installing the pressure reducing valve, the pipeline must be cleaned, and the gas should be used for continuous purging to thoroughly clear the magazines and particles such as iron filings when cutting the pipeline;
4.In the flow state, turn the handle clockwise to increase the outlet pressure and counterclockwise to decrease the outlet
pressure. When the outlet pressure is reduced to zero, the handle of the pressure reducing valve should be in a loose state.
Excessive counterclockwise rotation of the handle may cause the thread to get stuck, or the handle is loose and cannot be adjusted again
5.It is not recommended to use the pressure reducing valve as a stop valve for a long time, otherwise the valve seat may be deformed, resulting in unstable flow
6.Handle with care to avoid any impact, especially the pressure reducing valve with pressure gauge. The pressure gauge is a sensitive element and may be damaged by external force
FAQ
1. who are we?
We are based in Guangdong, China, start from 2011,sell to Southeast Asia(20.00%),Africa(20.00%),Eastern Asia(10.00%),Mid East(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),Central America(5.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),North America(5.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
pressure regulator,Tube fittings,solenoid valve,Needle valve,check valve
4. why should you buy from us not from other suppliers?
We have a couple of years with professional engineers and dedicated technicians.can provide security products for you
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,Western Union;
Language Spoken:English,Chinese