logo
Send Message
Shenzhen Wofly Technology Co., Ltd.
Shenzhen Wofly Technology Co., Ltd.
News
Home / News /

Company News About TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?

TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?

2026-11-18
TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?

In semiconductor, photovoltaic, and compound semiconductor manufacturing, trimethylaluminum (TMA) and trichlorosilane (TCS) are two important process precursors. TMA is used as an aluminum source for thin-film deposition, while TCS is used for polycrystalline silicon and silicon epitaxy. Both are highly reactive, and the supply and safety control of their source bottles are directly related to production line stability and personnel safety.

 

01 Key Challenges in the Supply of TMA and TCS Feed Bottles

 

Spontaneous Combustibility and Moisture Sensitivity of TMA

TMA [Al(CH₃)₃] is a colorless, transparent liquid at room temperature. It spontaneously combusts upon exposure to air and reacts violently with water, acids, and compounds containing active hydrogen. Due to these properties, source vials must be stored and transported in a sealed container under an inert atmosphere at all times; even the slightest trace of moisture or oxygen can trigger exothermic reactions, combustion, and material failure.

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  0

                   Stainless Steel Source Vials for Trimethylaluminum (TMA)

 

Risks of Hydrolysis and Corrosion in TCS
TCS [SiHCl₃] hydrolyzes immediately upon contact with water, producing solid silicon dioxide [SiO₂] and hydrogen chloride [HCl], which corrode most metals in the presence of water. In an anhydrous state, it causes virtually no corrosion to iron or stainless steel; however, once water vapor is introduced, the hydrolysis side reaction simultaneously compromises both the cleanliness of the source bottle’s inner walls and the purity of the gas.

 

Cleanliness and Sealing Requirements
Electron-grade TMA and TCS are highly sensitive to metallic impurities, moisture, and particulates. The inner surfaces of source bottles must undergo electropolishing, and valves and connections must ensure a high-purity seal to prevent the introduction of trace particulates, metal ions, or water vapor during storage and transportation, which could compromise the stability of the deposition process.

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  1

                                              Inside the TMA Gas Holder

 

02 Key Aspects of Safety Control for Source Vials

 

1. Inert Atmosphere Protection and Sealing Management

Throughout the entire process of filling, storing, and connecting source cylinders, high-purity nitrogen [N₂] or argon [Ar] is used to maintain positive pressure protection, isolating the cylinders from air and moisture. Cylinder valves and connections are regularly leak-tested to ensure reliable sealing, thereby preventing spontaneous combustion and hydrolysis reactions at the source.

 

2. Special Gas Cabinet Isolation and Negative-Pressure Ventilation

Source cylinders containing hazardous gases should be placed inside special gas cabinets equipped with ventilation systems. The cabinet maintains a negative pressure environment and is fitted with exhaust ductwork; in the event of a trace leak, hazardous gases are directed outward, preventing their spread into the cleanroom and reducing the risk of personnel exposure and fire or explosion.

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  2

                              TMA Specialty Gas Cabinet Showcase

 

3. Leak Detection and Emergency Shut-off

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  3

                       Display of Gas Detectors in a Specialty Gas Cabinet

 

Gas detectors and pressure monitoring systems are installed in the specialty gas cabinets and distribution boxes; when abnormalities such as leaks or overpressure are detected, the system automatically triggers an alarm and shuts off the gas supply. Automatic purging and switching reduce the need for manual intervention and shorten emergency response times.

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  4

       Overview of the Special Gas Cabinet Supply Area at the Conductor Plant

 

03 Wofei Technology’s Systematic Security Control Solution

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  5

                              Internal Piping Layout of the TMA Gas Holder

 

1. Wofly Technology’s Systematic Safety Control Solution

Wofly Technology’s specialty gas cabinet integrates cylinder storage, purging and replacement, and automatic shut-off within a sealed enclosure. Combined with negative-pressure exhaust and leak detection, it enables the zoned isolation and continuous, safe supply of hazardous gases such as TMA and TCS.

 

2. Multi-Channel Independent Control of Valve Manifolds

Valve manifolds (VMB) distribute a single upstream gas source to multiple process equipment lines. Each branch is equipped with an independent shut-off valve and pressure monitoring, enabling single-point isolation for maintenance without affecting the overall gas supply, thereby enhancing system reliability and maintenance safety.

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  6

                          Wofly Technology VMB Valve Box Showcase

 

3. End-to-End Gas Supply and Safety Management

From cylinder connection and pipeline transportation to the point of use, WoFei Technology utilizes specialty gas cabinets and valve distribution boxes as the core components, complemented by purging and replacement, leak detection, and interlocked shut-off systems. This creates a closed-loop safety system covering the entire process—from storage and transportation to distribution and use—ensuring a stable supply of high-purity gases.

 

latest company news about TMA and TCS Source Vial Supply: What Are the Challenges, and How Is Safety Managed?  7

                         VMB Internal EP-Grade Stainless Steel Piping

 

The challenges in supplying source bottles for TMA and TCS stem from their high reactivity and stringent purity requirements. The key to ensuring safety lies in the coordinated use of inert gas shielding, isolated exhaust ventilation, leak detection, and automatic interlocks. Only by relying on systematic equipment and adhering to standardized operating procedures can we ensure a safe supply of process gases while maintaining the minimum safety standards.