-
Stainless Steel Pressure Regulator
-
Back Pressure Regulating Valve
-
Changeover Manifold
-
Brass Pressure Regulator
-
Stainless Steel Tube Fittings
-
Air Compressor Check Valve
-
Stainless Steel Ball Valve
-
Water Solenoid Valve
-
Stainless Steel Needle Valve
-
Gas Solenoid Valve
-
Stainless Steel Diaphragm Valve
-
Gas Flow Meter
-
Flexible Hose Tubing
-
Pneumatic Pressure Control Valve
-
Gas Pressure Test Gauge
-
Medical Oxygen Regulator
-
Dariof FassiniAll perfect. Quality is 4.5 on 5 but quality to price ratio is excellent.
-
Jasper MokkinkI have had an great experience ordering from Wolfy! The communication was always quick and clear. Adding parts to your order after you made your payment is also accepted by Wolfy. They are also willing to hold your order for a little bit if you need time to decide what additional parts you would like to add. I ordered compression fittings.
AFK Stainless Steel Tube Fittings 1/8 1/4 3/8 1/2 In Female Branch Tee Fitting NPT Thread
Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xConnection | Female | Technics | Forged |
---|---|---|---|
Product Name | Female Branch Tees Npt Thread Tube Fitting | Material | Stainless Steel |
Color | Silver | Application | Industry |
Thread | NPT | Size | 1/8~1/2 |
MOQ | 10pcs | ||
High Light | Forged female branch tee fitting,Female Tee Stainless Steel Tube Fittings,NPT Thread female branch tee fitting |
Product Description for 1/2 female branch tees npt thread tube fitting
Specification for 1/2 female branch tees npt thread tube fitting
Female NPT to Female NPT for Stainless Steel Tube Fittings | ||||
Part No |
P NPT |
Dimensions(mm) | ||
L | F | |||
inch | mm | |||
FT-02N | 1/8 | 26.4 | 1/2 | 12.7 |
FT-04N | 1/4 | 29.7 | 11/16 | 17.46 |
FT-06N | 3/8 | 36.1 | 13/16 | 20.63 |
FT-08N | 1/2 | 39.6 | 1 | 25.4 |
Material Standard for 1/2 female branch tees npt thread tube fitting | ||
Material | Bar | Forging |
316 Stainless Steel | ASME SA479,ASTM A76 | ASME SA 18,ASTM A18 |
Brass |
ASME B16 ASTM B453 |
ASTM B83 |
Carbon Steel | ASTM A108 | -- |
Electroplating and Coating
In order to resist corrosion, all carbon steel joints are treated with electroplated zinc coating.
Clean
The components shall be cleaned to remove oil, grease and loose particles
Pressure Rating Basis
The rating is based on pressure pipe B31 at room temperature 3. Based on ASME Code of and process pipeline.
Material | Allowable Stress Value |
316 stainless steel | 20000 psi(1378 bar) |
Brass | 10000 psi(689 bar) |
Carbon Steel | 20000 psi(1378 bar) |
Temperature Rating
The system temperature may be limited by thread sealant or, where appropriate, gasket or O-ring material.
Material | Maximum temperature ℃ (° F) |
316 stainless steel | 537(1000) |
Brass | 04(400) |
Carbon Steel | 190(375) |
Gasket, O-ring Material | |||
Element | Material Science | Maximum temperature ℃ (° F) | Minimum temperature ℃ (℉) |
RS Washer | Nitrile rubber | 110(30) | -5(-13) |
Fluorocarbon FKM | 204(400) | -15(5) | |
RG,RP Washer | Copper | 204(400) | -198(-35) |
SAE,O-ring | Fluorocarbon FKM | 204(400) | -8(-0) |
FAQ
Q1. What products can you provide?
Re: Compression fittings(connections), hydraulic fittings, tube fittings, ball valves, needle valves etc.
Q2. Can you make the products based on our requests, such as size, connection, thread, shape and so on?
Re: Yes, We have experienced techincal team and can design and produce the products according to your requirements.
Q3. What about the quality and price?
Re: Quality is very good. Price is not low but pretty reasonable at this quality level.
Q4. Can you provide samples to test? For free?
Re: Of course, you can take several to test firstly. Your side shall bear the cost due to its high value.
Q5. Can you operate OEM orders?
Re: Yes, OEM is supported though we also have our own brand named AFK.
Q6. What payment methods for chose?
Re: For small order, 100% Paypal, Western Union and T/T in advance. For bulk purchase, 50%T/T, Western Union, L/C as deposit, and 50% balance paid before shipment.
Q7. How about the lead time?
Re: Usually, delivery time is 5-7 working days for sample, 7-10 working days for mass production.
Q8. How will you ship the goods?
Re: For small amount, international express is used mostly such as DHL, FedEx, UPS, TNT. For large amount, by air or by sea. Besides, you also can have your own forwarder pick up the goods and arrange the shipment.