Dariof FassiniAll perfect. Quality is 4.5 on 5 but quality to price ratio is excellent.
Jasper MokkinkI have had an great experience ordering from Wolfy! The communication was always quick and clear. Adding parts to your order after you made your payment is also accepted by Wolfy. They are also willing to hold your order for a little bit if you need time to decide what additional parts you would like to add. I ordered compression fittings.
AFK R1100 Semi-automatic Changeover Switch Device with Stainless Steel Pressure Reducing Valve
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Stainless Steel, Stainless Steel
|Temperature Of Media
|Pure Gases Standard Gases And Corrosive Gases Etc
|Standard Or Nonstandard
|Single Package Size
pressure control panel,
automatic switchover manifold
R1100 Serie semi-automatic switch device applied two pipe lines supply, that is main cylinder supply set and spare cylinder set. The device makes a stable output by using two-stage regulators.
- Used R11 Serie Pressure reducing regulator
- Metal-to-metal diaphragm seal
- Inlet fitted with check valve
- Wall mounting
- Maximum inlet pressure: 3000psig
- output pressure: 0~25, 0~50, 0~100,0~200psig
- working temperature: -40~+165 deg F(-40~+74 Deg C)
- leakage rate: bubble tight
- Cv value=0.06
- gas chromatography
- gas lasers
Materials of Main Structure
|Name of Series
|Pressure Contol Range
Q1. What products can you provide?
Re: High pressure regulator, cylinder gas regulator, ball valve, needle valve, compression fittings(connections).
Q2. Can you make the products based on our requests, such as connection, thread, pressure and so on?
Re: Yes, We have experienced techincal team and can design and produce the products according to your requirements. Take a pressure regualtor for example, we can set the range of pressure gauge according actual working pressure, if the regulator is connected to a gas cylinder, we can add an adaptor such as CGA320 or CGA580 to connect the regulator with the cylinder valve.
Q3. What about the quality and price?
Re: Quality is very good. Price is not low but pretty reasonable at this quality level.
Q4. Can you provide samples to test? For free?
Re: Of course, you can take several to test firstly. Your side shall bear the cost due to its high value.
Q5. Can you operate OEM orders?
Re: Yes, OEM is supported though we also have our own brand named AFK.
Q6. What payment methods for chose?
Re: For small order, 100% Paypal, Western Union and T/T in advance. For bulk purchase, 30%T/T, Western Union, L/C as deposit, and 70% balance paid before shipment.
Q7. How about the lead time?
Re: Usually, delivery time is 5-7 working days for sample, 10-15 working days for mass production.
Q8. How will you ship the goods?
Re: For small amount, international express is used mostly such as DHL, FedEx, UPS, TNT. For large amount, by air or by sea. Besides, you also can have your own forwarder pick up the goods and arrange the shipment.