-
Stainless Steel Pressure Regulator
-
Back Pressure Regulating Valve
-
Changeover Manifold
-
Brass Pressure Regulator
-
Stainless Steel Tube Fittings
-
Air Compressor Check Valve
-
Stainless Steel Ball Valve
-
Water Solenoid Valve
-
Stainless Steel Needle Valve
-
Gas Solenoid Valve
-
Stainless Steel Diaphragm Valve
-
Gas Flow Meter
-
Flexible Hose Tubing
-
Pneumatic Pressure Control Valve
-
Gas Pressure Test Gauge
-
Medical Oxygen Regulator
-
Dariof FassiniAll perfect. Quality is 4.5 on 5 but quality to price ratio is excellent.
-
Jasper MokkinkI have had an great experience ordering from Wolfy! The communication was always quick and clear. Adding parts to your order after you made your payment is also accepted by Wolfy. They are also willing to hold your order for a little bit if you need time to decide what additional parts you would like to add. I ordered compression fittings.
316L 3000Psi Stainless Steel Pressure Regulator CGA330 Cylinder Connector

Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xAfter-sales Service Provided | Online Support | Condition | New |
---|---|---|---|
Material | Stainless Steel,SS304/SS316L,316,brass | Warranty | 1 Year |
Cv | 0.08 | Outlet Pressure | 0~25,0~50,0~100,0~250,0~500 Psig |
Body Thread | 1/4"NPT(F) | Flowmeter | Accurated Reading |
Place Of Origin | China | Input Pressure | Preset Input Pressure Gas Regulator |
High Light | 3000Psi Stainless Steel Pressure Regulator,316L Stainless Steel Pressure Regulator,CGA330 Cylinder Joint High Pressure Gauge |
R11 Series stainless steel pressure regulator is Single stage diaphragm, vacuum structure Stainless diaphragmoutput. It has piston pressure reducing structure, constant outlet pressure,mainly used for high input pressure,suitable for purified gas, standard gas, corrosive gas etc.
TYPICAL APPL ICATIONS
- Laboratory
- Gas Chromatograph
- Gas Laser
- Gas bus
- Oil and chemical industry
- Tested instrumentation
DESIGN FEATURES
- Single-stage reduce structure
- Use hard-seal between body and Diaphragm
- Body Thread:1/4" NPT (F)
- Easy to sweep inside body
- Filter mesh inside
- Panel mountable or wall mounted
SPECIFICATION |
MATERIAL |
||
Max inlet pressure : |
500,3000 psig |
Body: |
316L, Brass |
Outlet pressure : |
0~25, 0~50, 0~100,0~250,0~500 psig |
Roof: |
316L, Brass |
Proof pressure: |
1.5 times of maximum rated pressure |
Diaphragm: |
316L |
Working tem: |
-40°F ~+446°F (-40*C~+230°C) |
Filter mesh: |
316L(10μ m) |
Leakage rate: |
2*10-8 atm cc/sec He |
Valve seat: |
PCTFE,PTFE,Vespel |
Cv: |
0.08 |
Spring loaded: |
316L |
Valve disc regulation pole: |
316L |
R11 | L | B | D | F | G | 00 | 00 | P |
Item |
Body Materia |
Body Hole |
Inlet pressure |
Outlet pressure |
Pressure gauge | Inlet size | Outlet size | mark |
R11 | L:316 | A | D:3000 psi | F:0-500 psi | G:MPa gauge | 00:1/4 " NPT (F) | 00: 1/4 " NPT(F) | P:Panel mounting |
B:Brass | B | E:2200 psi | G:0-250 psi | 01:1/4 " NPT (M) | 01: 1/4 " NPT(M) | N:Needle valve | ||
D | F:500 psi | l:0-100 psi | P:Psig/bar gauge | 23: CGA330 | 10:1/8 " OD | N:Needle valve | ||
G | K:0-50 psi | 24: CGA350 | 11:1/4 " OD | D:Diaphragm valve | ||||
J | L:0-25 psi | W:No gauge | 28: CGA660 | 12:3/8 " OD | ||||
M | 28: CGA660 | 15:6mm OD | ||||||
30: CGA590 | 16:8mm OD | |||||||
52: G5/8 "-RH(F) | ||||||||
63: W21.8-14H(F) | ||||||||
64: W21.8-14LH(F) |
