-
Stainless Steel Pressure Regulator
-
Back Pressure Regulating Valve
-
Changeover Manifold
-
Brass Pressure Regulator
-
Stainless Steel Tube Fittings
-
Air Compressor Check Valve
-
Stainless Steel Ball Valve
-
Water Solenoid Valve
-
Stainless Steel Needle Valve
-
Gas Solenoid Valve
-
Stainless Steel Diaphragm Valve
-
Gas Flow Meter
-
Flexible Hose Tubing
-
Pneumatic Pressure Control Valve
-
Gas Pressure Test Gauge
-
Medical Oxygen Regulator
-
Dariof FassiniAll perfect. Quality is 4.5 on 5 but quality to price ratio is excellent.
-
Jasper MokkinkI have had an great experience ordering from Wolfy! The communication was always quick and clear. Adding parts to your order after you made your payment is also accepted by Wolfy. They are also willing to hold your order for a little bit if you need time to decide what additional parts you would like to add. I ordered compression fittings.
AFK Low Pressure 1.6Mpa Stainless Steel Pressure Regulator For Toxic / Corrosive Gases

Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xAfter-sales Service Provided | Online Support | Condition | New |
---|---|---|---|
Weight | 2.5kg | Material | Stainless Steel,316 |
Warranty | 1 Year | Color | Silver |
Working Pressure | 2.5MPa | ||
High Light | 1.6Mpa Stainless Steel Pressure Regulator,corrosive gases Stainless Steel Pressure Regulator,Stainless Steel Low Pressure gas Regulator |
The single gauge pressure of R12 pressure regulator of this picture product is 1.6Mpa, which is equivalent to the pressure of 200psi, and the actual gas pressure shall not exceed 200psi, that is, 1.6Mpa
Technical Data
1. Maximum inlet pressure: 500PSI or 3000psi
2. Outlet pressure range: 0 ~ 30, 0 ~ 60, 0 ~ 100, 0 ~ 150, 0 ~ 250
3. Material of internal components:
Valve seat: PCTFE
Diaphragm: Hastelloy
Filter element: 316L
4. Working temperature: - 40 ℃ ~ + 60 ℃ (- 40 ℉ ~ + 140 ℉)
5. Leakage rate (helium): Inside: no visible bubbles External: ≤ 1x10-9 mbar L / S
6. Flow coefficient (CV): 1.0
7. Parent port:
Inlet: 1 / 2NPT
Outlet: 1 / 2NPT
Pressure gauge port: 1 / 4NPT
Ordering information
R12 | L | B | D | F | G | 02 | 00 | P |
Item |
Body Materia |
Body Hole |
Inlet pressure |
Outlet pressure |
Pressure gauge |
Inlet size |
Outlet size |
mark |
R12 | L:316 | A | D:3000psi | G:0~250psig | G:MPa gauge | 02:3/8”NPT(F) | 02:3/8”NPT(F) | P:Panel mointing |
B:Brass | B | F:500psi | H::0~125psig | 03:3/8”NPT(M) | 03:3/8”NPT(M) | R:With relief valve | ||
D | I::0~100psig | P:Psig/bar gauge | 04:1/2”NPT(F) | 04:1/2”NPT(F) | ||||
G | K::0~50psig | 05:1/2”NPT(M) | 05:1/2”NPT(M) | |||||
J | L::0~25psig | W:No gauge | 12:3/8”OD | 12:3/8”OD | ||||
M | 13:1/2”OD | 13:1/2”OD | ||||||
Other type is available | Other type is available |
Project Case
1. Maintain gas purity
2. Uninterrupted gas supply: the system can switch between gas cylinders manually and automatically to ensure continuous gas supply
3. Low pressure warning: when the air pressure is lower than the alarm limit, the alarm device can automatically start the alarm
4. Stable gas pressure: the system uses two-stage decompression to supply gas, which can obtain very stable pressure
5. High efficiency: through the gas supply control system, the gas in the gas cylinder can be fully used to reduce the gas storage margin and reduce the gas consumption cost
6. Easy operation: all gas cylinders are stored in the same location, reducing the operation of handling and installation, and saving time and cost